Pages List
List view
Getting Started
Getting Started
Product Data Management
Product Data Management
CAD Collaboration
CAD Collaboration
Workflows
Workflows
Pricing and Billing
Pricing and Billing
Help & Support
Help & Support
Creo Parametric Setup: File Iterations and Search Paths
This guide covers two Creo Parametric settings that can help you manage files and open assemblies, taking advantage of CAD ROOMS features:
- Disable file iterations with
save_file_iterationsto stop Creo creating additional numbered files each time you save. - Configure search paths with
search_pathto help Creo locate referenced parts and assemblies stored in other folders.
Choose the section that applies to your workflow.
Disable File Iterations
By default, Creo Parametric saves a new numbered iteration (
bracket.prt.1, bracket.prt.2…) each time you save. In a folder synced with CAD ROOMS, these files can make file management and version tracking more confusing.It applies to all Creo file types:
File Type | Example |
Part ( .prt) | bracket.prt.1, bracket.prt.2, bracket.prt.3 |
Assembly ( .asm) | assembly.asm.1, assembly.asm.2, assembly.asm.3 |
Drawing ( .drw) | drawing.drw.1, drawing.drw.2, drawing.drw.3 |
Step 1 — Open the Configuration Editor
- In Creo Parametric, open File → Options.
- Select Configuration Editor on the left panel.
Step 2 — Set save_file_iterations to no
- Click Add to open the Add Option dialog.
- In Option name, enter
save_file_iterations. - Set Option value to
no. - Click OK to add the option. If
save_file_iterationsis already listed in Configuration Editor, change its value tonothere.

Step 3 — Save the Configuration
- Click OK in Creo Parametric Options. When prompted, choose Yes to save the setting to a
config.profile that Creo loads at startup. - Restart Creo Parametric.
- Reopen File → Options → Configuration Editor and confirm
save_file_iterationsis still set tono.

ℹ️ If the setting is missing or reverted, anotherconfig.profile loaded at startup may be overriding it. Check your Creo startup directory and any shared configuration files.
Verify File Iterations Are Disabled
- Create a new test part in Creo Parametric.
- Save the part, make a small change, and save it again.
- Check the working directory to confirm Creo has not created additional numbered iterations.
If the test file is in a project synced with CAD ROOMS, you can also verify the end-to-end workflow:
- In the CAD ROOMS Desktop App, the saved changes appear in the staging area. Add a short description, then click Contribute.
- Open the file's version history in CAD ROOMS and confirm the new contribution appears.
ℹ️ Saving in Creo and contributing in CAD ROOMS are separate actions. Local changes are added to CAD ROOMS version history only after they are contributed from the Desktop App.
Existing Numbered Files
Changing
save_file_iterations to no does not rename or delete existing numbered files, such as bracket.prt.3. If you only want to prevent new numbered files from being created, no further action is needed.If you also want to clean up older iterations in a project, you can use Creo's Delete Old Versions command:
- Back up your project files before making changes.
- In Creo, open the relevant working directory.
- Go to File → Manage File → Delete Old Versions (or use the
purgeutility, where available). - Confirm the files to be removed.
⚠️ Important: This operation deletes older local iterations but does not remove the numbered extension from the remaining file. Before proceeding:
- Contribute any versions you want to keep to CAD ROOMS.
- Check that no parent assembly or drawing references a specific numbered iteration (such as
bracket.prt.2) — those references may break.- Preserve any local versions you may still need.
Configure Search Paths
When an assembly references parts or subassemblies stored in another folder, configure
search_path to help Creo locate those files. Add each specific folder containing referenced files, then open the assembly to confirm they load correctly.Step 1 — Open the Configuration Editor
- In Creo Parametric, open File → Options.
- Select Configuration Editor on the left panel. If you need to inspect a particular loaded configuration file, select it from the Show menu.
Step 2 — Add a Search Path
- Click Add. In the Option name field, type
search, then click Find. - In the Find Option window, enter
searchin Type keyword and click Find Now if the results are not already shown. Selectsearch_pathfrom the results. Under Set value, click Browse. - In Select Directory, choose the CAD ROOMS folder that contains the referenced parts or subassemblies, then click OK. If the files are in different folders or subfolders, add each directory separately.
- Click Add / Change. Repeat steps 1–4 for any other directories containing referenced files, then click Close.
- Click OK in Creo Parametric Options. When prompted, choose Yes to save the settings to a
config.profile that Creo loads at startup. Restart Creo, then reopen Configuration Editor and confirm thatsearch_pathshows the folder you added under Value.


Step 3 — Verify the Search Paths
Open an assembly that references a component in one of the folders you added. Confirm that Creo loads the component without asking you to locate it.
💡 Tip: If the assembly still has missing references, verify the files are accessible and add each specific directory containing them as an additionalsearch_pathentry (or usesearch_path_fileif you need to manage a large list of directories). Save the updatedconfig.profile, reopen the assembly, and ensure Creo loaded the intended version if duplicate filenames exist across folders.
FAQs
Will I lose previous versions after disabling it?
No. Changing this setting does not automatically delete existing iteration files. New files will be saved without numbered extensions, while existing numbered files may retain theirs. Make sure you preserve any local versions you need before cleaning up older files.
Can I re-enable save_file_iterations later?
Yes. Open File → Options → Configuration Editor, find
save_file_iterations, change the value back to yes, and save to config.pro. Creo will resume creating numbered iterations on save.Does this setting affect other CAD tools I use with CAD ROOMS?
No.
save_file_iterations is a Creo Parametric configuration option and only affects how Creo saves files. SolidWorks, Inventor, NX, CATIA, and other supported CAD tools are not affected.What if I need to roll back a change?
Use CAD ROOMS version history. Open the file, select an earlier contribution, and either download or restore it. See How to Restore Previous Versions.
Why can’t Creo find a part after I add a search path?
- Subfolders: If the missing part is in a subfolder, add the specific directory containing it as an additional
search_pathentry. - Configuration persistence: Reopen Configuration Editor after restarting Creo and confirm the path is still present. If it is missing, check that the setting was saved to a
config.profile loaded at startup.
Can Creo load the wrong part from a search path?
Yes. If multiple locations contain Creo models with identical filenames, Creo may load a different model than intended. During assembly retrieval, Creo checks locations such as the current session and working directory before searching configured paths. Among matching search-path directories, it retrieves the first match it finds. Use unique part filenames where possible and verify that the assembly loaded the intended component.
Related Articles
Creo Parametric Setup: File Iterations and Search PathsDisable File IterationsStep 1 — Open the Configuration EditorStep 2 — Set save_file_iterations to noStep 3 — Save the ConfigurationVerify File Iterations Are DisabledExisting Numbered FilesConfigure Search PathsStep 1 — Open the Configuration EditorStep 2 — Add a Search PathStep 3 — Verify the Search PathsFAQsRelated Articles
/creo-parametric-file-iterations-search-paths